Skip to product information
IDC WOODCRAFT - The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank image 0

IDC WOODCRAFT - The HOG 1/4" Roughing Endmill Bit For CNC Routers, 1/4" Shank

In stock
$67.00
Sale price  $67.00 Regular price 
FREE SHIP OVER $250

Usually ships within 24 hrs

shank

1/4"

Cut Length

1 1/2"

Diameter

1/4"

Material

Solid Carbide

flutes

3

coating

ZrCN

30-Day Guarantee

Free Ship $250+

Ships Canada

Clear the wood fast. Save your finishing bits for the finishing.

The IDC HOG is a 1/4" roughing endmill built for one job: removing a lot of material from your CNC router projects in a hurry. With a 3/4" depth of cut per pass, an 80 ipm feed and plunge rate, and an 80% stepover, it strips out thick hardwood in a fraction of the time a regular up-cut or down-cut would take.

It also protects the rest of your bit collection. Let the HOG take the heavy cuts, then bring in a finishing bit for the final pass only. Your finishing bits stay sharper longer and you replace them less often, especially in hardwood.

The ZrCN composite coating adds tool life. Coating specs: hardness of 2500 Vickers, thickness of 1 to 4 microns, friction coefficient of 0.3, maximum service temperature of 1000° F (550° C).

What is the HOG good for?

  • Guitar making
  • Keepsake boxes
  • Cutting boards
  • Bulky 3D carvings
  • Table legs, like Victorian or French styles
  • Any thick project where you need to remove a lot of hardwood

The HOG isn't designed for a pretty cut. It's designed for speed.

HOG or BEAST? Both are 1/4" roughing bits. Pick the HOG when you need reach: its 1.5" flute length handles deep, thick stock. Pick the BEAST if you want a shorter, stiffer 3-flute build with a faster 100 ipm feed rate. Either way, follow up with a finishing bit, like our 1/4" Carbide Compression Bit, for clean edges on both faces.

Specs
  • Cut diameter: 1/4"
  • Shank: 1/4"
  • Flute length: 1.5"
Settings
  • Feed: 80 ipm
  • Plunge: 80 ipm
  • Depth of cut per pass: 3/4"
  • Stepover: 80%

What is The HOG roughing endmill for?

Removing a lot of material fast. It's an up-cutting 1/4″ roughing bit that does the heavy lifting on thick hardwood projects, so your finishing bits only handle the final pass.

What settings does IDC list?

80 ipm feed, 80 ipm plunge, 3/4″ depth of cut per pass and an 80% stepover.

Will it leave a clean finish?

No, and it isn't meant to. It's designed for speed, so follow up with a finishing bit.

What projects is it good for?

Guitar making, keepsake boxes, cutting boards, bulky 3D carvings, table legs and other thick hardwood projects where you need to remove a lot of wood.

What is the coating, and what does it do?

ZrCN composite coating, which increases tool life. IDC lists it at 2500 Vickers hardness, 1 to 4 microns thick, with a 0.3 friction coefficient and a maximum service temperature of 1000°F (550°C).

you may also like