Skip to product information
1/8" Carbide Single flute Compression bit image 0
  • 1/8" Carbide Single flute Compression bit image 0
  • 1/8" Carbide Single flute Compression bit image 1
1/8" Carbide Single flute Compression bit
CNCBits

1/8" Carbide Single flute Compression bit

In stock
$22.50
$22.50 $28.50
FREE SHIP OVER $250

Usually ships within 24 hrs

shank

1/8"

Cut Length

3/4"

Diameter

1/8"

Material

Solid Carbide

flutes

1

coating

none

30-Day Guarantee

Free Ship $250+

Ships Canada

1/8" Single-Flute Compression Bit — Clean Edges on Both Faces

Single-flute compression geometry combines the benefits of upcut and downcut in one bit, so both the top and bottom of your material come out clean — no flipping the panel, no splintered edges on either face.

Solid carbide construction handles laminated plywood, melamine, MDF, particle board, OSB, and solid wood with equally clean results.

Specs
  • Cut diameter: 1/8″
  • Shank: 1/8″
  • Length: 1.75″
  • Cut length: 0.75″
  • Material: 100% carbide
Settings
  • Speed (rpm): 18,000
  • Feed: 60 ipm
  • Plunge: 35 ipm

Best for cabinetry, laminate panels, and sheet goods where both faces need a flawless finish.

What does a single-flute compression bit do?

It combines up-cut and down-cut benefits in one bit, so both faces of your material come out clean, with no flipping the panel and no splintered edges on either side.

What speeds and feeds should I use?

Start at 18,000 rpm, 60 ipm feed and 35 ipm plunge.

What materials can I cut?

Laminated plywood, melamine, MDF, particle board, OSB and solid wood.

How is it different from the 1/8″ 2-flute compression bit?

Both give clean top and bottom faces. This single-flute version has a 0.75″ cut length, and the 2-flute version has a 1.125″ cut length.

What are its dimensions?

1/8″ cutting diameter and shank, 1.75″ overall length and 0.75″ cut length, in 100% carbide.

you may also like