Skip to product information
1/32" 2 Flute Down-Cut Spiral bit image 0
  • 1/32" 2 Flute Down-Cut Spiral bit image 0
  • 1/32" 2 Flute Down-Cut Spiral bit image 1
1/32" 2 Flute Down-Cut Spiral bit
CNCBits

1/32" 2 Flute Down-Cut Spiral bit

In stock
$22.50
$22.50
FREE SHIP OVER $250

Usually ships within 24 hrs

shank

1/8"

Cut Length

3/16"

Diameter

1/32"

Material

Solid Carbide

flutes

2

coating

None

30-Day Guarantee

Free Ship $250+

Ships Canada

No-Fuzz 1/32" Down-Cut Spiral Bit — Clean Cuts on Your Finest Detail Work

Tired of fuzzy, torn edges wrecking your fine detail passes? The 1/32" Down-Cut Spiral Bit pulls chips downward instead of up, so your top surface comes out clean — no sanding, no touch-ups, no wasted material.

Solid carbide construction holds its edge through the tiny, repetitive passes that fine detail work demands, so you get consistent results from your first cut to your last.

Specs
  • Cut diameter: 1/32″
  • Shank: 1/8″
  • Length: 2.25″
  • Cut length: 0.185″
  • Material: 100% carbide
Settings
  • Speed (rpm): 18,000
  • Feed: 10 ipm
  • Plunge: 10 ipm

Results vary by material and machine rigidity — treat these as your starting point.

What is a 1/32″ down-cut spiral bit for?

Your finest detail work. It pulls chips downward, so the top surface comes out clean with no fuzzy or torn edges.

What speeds and feeds should I use?

18,000 rpm with a 10 ipm feed and 10 ipm plunge. At this size, slow and steady is the point. Use these as your starting numbers.

How deep can it cut?

Cut length is 0.185″, so it's built for shallow detail passes, not deep pockets.

What collet size does it need?

A 1/8″ collet. The shank is 1/8″, and overall length is 2.25″.

Why choose a down-cut for detail work?

A down-cut pushes wood fibres down into the material, so the top edge stays clean. An up-cut lifts chips out of the cut, which clears faster but can leave a rougher top edge.

you may also like